To use a hardware control surface to give you tactile control over Logic Pro, you need to connect, add, logic pro x control surfaces free configure your control surface device for use with Logic Pro.

The setup procedures and preferences are common to all directly supported control surfaces. Some of these additional options may be useful for your project.

For all other supported devices: An available peripheral port. Ideally, this should be a direct connection with the computer, rather than through a hub. Refer to the documentation provided by the manufacturer of your device.

An installed driver if required by your control surface supported by the macOS version logic pro x control surfaces free on your computer. In a standard control surface configuration you can use a single control surface, or several. Each device can run independently or can be part of a control surface group comprised of multiple devices as described in Create control surface groups in Logic Pro. The number of devices that can be used simultaneously depends on the number of free ports available acer recovery management windows 10 your system.

Using multiple control surfaces allows you to control more tracks and channels, effects, and other parameters simultaneously.

 
 

 

8 Best Control Surfaces For Logic – Music Industry How To.Logic Pro X Control Surfaces Support. For OS X – PDF Free Download

 

Try before buy! Free demo available for testing. Standard functionality like mixer and transport operation will be accessible in other applications with basic control surface support as well.

As of version 1. There is no computer side server or protocol conversion software other than the driver required. A free driver, available from our website, is required for some of the proprietary solutions. The apk contains both tablet and phone versions. Most recent phones will let you alternatively use the tablet layout. Please try before you buy! The free version is mostly identical and will let you check if things are useable with your network setup before spending money. The app needs some initial PC-side configuration, please see website for help.

Refer to the documentation provided by the manufacturer of your device. An installed driver if required by your control surface supported by the macOS version running on your computer. Speed up audio mixing tasks, whether you make music, edit video, or create sound for picture.

You can even use it to extend your workflow across other Avid control surfaces. All you need is Wi-Fi. With intuitive onscreen controls, you can quickly tap, slide, and drag your way through a variety of application functions and parameters.

From adjusting levels, pan, and plugin settings, to monitor control, VCA Spill, and automation, you can navigate and speed your way through any project. Note: When you use a supported control surface with Logic Pro, some controls are pre-mapped to common functions. You can map unassigned controls to other Logic Pro commands and functions see Controller assignments overview on page The setup procedures and preferences are common to all control surfaces.

Ideally, this should be a direct USB or FireWire connection with the computer, rather than through a hub. Refer to the documentation provided by the manufacturer of your control surface. An installed driver if required by your control surface that is supported by the operating system you are using on your computer Important: Your MIDI interface must feature driver software that supports SysEx communication.

The number of devices that can be used simultaneously depends on the number of free ports of the appropriate type USB, FireWire, or other available on your system. Using multiple control surfaces allows you to control more tracks and channels, effects, and other parameters simultaneously. In a standard control surface configuration, you can use a single control surface or one accompanied by one or more expansion devices. You can also create control surface groups, as described in Create control surface groups on page.

Be sure to check the type of connection that your device features and that it is supported by your computer. Before connecting the device, read the installation instructions included with it, and install the latest version of any appropriate firmware or driver software, if needed. For more information, refer to the documentation that came with the device.

Note: Some control surfaces allow you to connect footswitches or pedals as additional controllers. If your control surface features suitable connectors, you can connect optional footswitches to remotely control playback and other functions. This frees your hands for other controls and can also be helpful when using guitars or other instruments that require two-handed playing.

FireWire and USB devices transmit and receive data through a single cable, if the device supports bidirectional communication. Daisy-chaining devices can result in errors and other problems, due to the amount of data transmitted in real time. Some LCDs display a welcome message, which includes the firmware version number. On most control surfaces with motorized faders, each fader slides to its top position, then back to its bottom or center position.

This self-diagnostic initialization procedure indicates that your units are functioning correctly. Note: Generally, you can turn on your computer either before or after you turn on the control surface. Some devices, however, may require the computer to be turned on before or after the device has initialized. Check the device documentation, and manufacturer website. Chapter 2 Basic control surface setup Important: It is recommended that such devices are directly connected to the computer, rather than through a network hub or switch.

Daisy-chaining can result in errors and other problems due to the amount of data transmitted in real time. You can add other devices that are not detected automatically using the Setup window.

Installation is covered in the setup section for your particular device. Some devices may require different or additional steps, but in most cases you only need to select the name of the device you want to use with Logic Pro, then add it. You can select more than one model by Command-clicking multiple entries in the list. If you select more than one model, Logic Pro performs the operation for each model, in turn. This process may take a few minutes.

You can also press Enter, or double-click the device name to initiate the scan. Logic Pro scans your system for connected devices, and automatically installs and connects to those it finds. Add a control surface manually Some control surfaces don t support automatic scanning.

Such devices must be added manually to your setup. Note: It is preferable to install devices by scanning, whenever possible. Logic Pro is able to gather more information about devices through scanning than with manual installation.

If another control surface of the selected type already exists in your setup, a warning dialog asks you to confirm the addition of the new device. A control surface group consists of multiple devices that you combine to create a single, unified virtual control surface.

You can create up to 20 control surface groups. Each group can consist of any number of physical devices. The only limiting factor is the number of available ports. You can independently determine the default behavior of each device in a group. For more information, see Device parameters on page The order of the icons from left to right defines the order in which tracks and parameters are arranged and displayed on the devices.

Mackie Control 1 controls channels 1 to 8, XT 1 controls channels 9 to 16, and XT 2 handles channels 17 to In the second row, the Mackie Control 2 and Mackie Control XT 3 form a second control surface group, controlling instruments on channels 1 to 8 and auxes on channels 9 to In the third row, the HUI forms a single unit control surface group.

This allows you to access, edit, and automate different sections of the Logic Pro Mixer. In the example above, the three units in the top row could be used to control audio and MIDI channel strips.

In the second row, Mackie Control 2 could be used to control software instrument channel strips 1 to 8, and XT 3 could be used to control aux channel strips 1 to 8. The HUI could be used to edit group definitions. The physical placement of units and the way you use them are completely flexible. Note: In most situations, the placement of your control surface units in relation to each other should be the same onscreen as in the real world.

Once you have created a control surface group, you can configure it in the Setup window. For more information, see Control Surface Group parameters overview on page You can configure your control surface setup to meet your needs by editing these parameters. Important: Any changes to settings in the Setup window or from the device are saved in a preferences file, named com. This file is saved independently of the Logic Pro Preferences file. When the device is added, the automatic setup or scan procedure sets the appropriate MIDI input and output port settings for the device.

Module: Shows the name of the control surface. Model: Shows the model name of the control surface. Version: Shows the firmware version for some control surfaces. Color: Click to select the color that indicates which tracks are being controlled by this control surface. Choose the color from the color picker that opens. In the Tracks window, the tracks controlled by this device are colored along the left edge of the track list when control surface bars are displayed.

Special parameters Some control surfaces such as the Mackie Control allow you to define special parameters such as fader touch sensitivity. When a device that offers special parameters is connected, the special parameters area appears in the inspector.

For more information about supported special parameters, refer to the documentation for your device. These parameters apply to the group associated with the selected device and allow you to set up each group to meet your needs. Many group parameters can also be changed directly from the control surface.

Control Surface Group parameters are divided into several areas. Display parameters Flip Mode pop-up menu: Choose the functions for the faders and rotary encoders of the channel strips on the device.

For control surfaces that contain a fader and a rotary encoder for each channel strip, Flip mode allows you to assign both controls to the same parameter, or to swap their assignments. The choices are: Off: Standard mode, with the fader acting as a volume control.

Duplicate: Assigns both the fader and encoder to the currently selected encoder parameter. Swap: Switches the fader and encoder assignments, making the fader a pan control and the encoder a channel volume control, for example. Mute: Disables the fader. This is useful when recording in the same room as the control surface and you want to avoid the mechanical noise of the faders. Any existing automation still functions normally. Display Mode: Click to limit the device display to only the name or only the value of the current parameter.

This is helpful if there is insufficient space for the display of both the parameter name and value. Clock Display: If your control surface features a position display, this parameter determines how the playhead position is represented. Channel Strip View Mode pop-up menu: Choose one of the following views: Arrange: The channel strips on the device correspond to Logic Pro channel strips as they appear in the Mixer window.

The layout of channel strips matches the way tracks are laid out in the Tracks window. Channel strip 1 in the Mixer window is equivalent to channel 1 on the control surface, channel strip 2 in the Mixer is equivalent to channel 2, and so on.

Instruments and channels used by multiple tracks are merged into one channel. This is the default mode of most devices, including the Mackie Control. All: The channel strips on the device correspond to Logic Pro channel strips of certain types, such as MIDI or aux channels, independent of their use in tracks. Control surfaces that support this view generally allow you to define which channel types you want to display. Tracks: This view is similar to Arrange view, but individual channel strips are shown when multiple tracks address the same channel.

Typically, this is a software or MIDI instrument channel, with several tracks routed to it. You can determine which parameters are edited by the channel strip controllers on the control surface. Note: The View is a property of the control surface group, not a global setting. One group can display busses, while the other shows tracks, for example. Fader Bank for Tracks View: Drag vertically, or enter an integer value to offset which tracks are controlled by the channel strips of the device in Tracks view.

For example, if your device has eight channel strips, these might normally be assigned to audio channel strips 1 8 in Logic Pro. Fader Bank for All View: Drag vertically, or enter an integer value to offset which Logic Pro channel strips are controlled by the device in All view. This parameter is only available when multiple channel strip types are displayed in the Mixer.

When single channel strip types are displayed, there are separate fader bank parameters.